Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: GF120T
Please check the manual packet for the LPG/NG conversion jets, pilot jet, dataplate, and fittings pack.
The heavy duty Hamoki GF-120T Free Standing Twin Tank Fryer has stainless steel construction and comes with a variety of useful and time-saving features. Some of these include an integrated splash back guard, triple tube and cool zone feature and drainage spout for quick and easy maintenance. The fryer also comes complete with two easy clean baskets.
Stainless steel front and galvanized sides
Vertical cast iron burner - each 30,000 BTU/hr
Stainless steel vat, split tank
6" stainless steel adjustable heavy duty legs
Tube design with baffles inside for better heat transfer
Continuous pilot for easy start of main flame
Chromed basket with plastic coating handle
Cold zone to prevent scorching of food particles at the bottom
Prompt temperature recovery to make sure fries are crispy
3/4 drain valve for easy drainage of oil
2 x 1/2″ NPT Rear Gas Connection
Thermostat adjusts from 93°C/200°F to 204°C/400°F
232°C 450°F hi-limiter guarantees safety
Height Adjustable feet
Additional Information: Can be configured for either natural gas (NG) or LPG connection by default - can only be converted by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 396 x 711 x 1168 mmFRYER BASKET SIZE: 152 x 311 x 165 mmPOWER: 35.2 kWCAPACITY: 11-13 x 2 LitresWEIGHT: 76 KGINPUT BTU/hr: 120,000MATERIAL: Stainless SteelCONTROL UNIT: ToggleINSTRUCTION MANUALEXPLODED DRAWING & PARTS LISTOVERALL DRAWINGTANK DRAWING
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: GF120
Please check the manual packet for the LPG/NG conversion jets, pilot jet, dataplate, and fittings pack.
The heavy duty Hamoki GF120 Free Standing Single Tank Fryer has stainless steel construction and comes with a variety of useful and time-saving features. Some of these include an integrated splash back guard, triple tube and cool zone feature and drainage spout for quick and easy maintenance. The fryer also comes complete with two easy clean baskets.
Vertical cast iron burner - each 30,000 BTU/hr
Stainless steel vat, available in 4 models
6" stainless steel adjustable heavy duty legs
Tube design with baffles inside for better heat transfer
Continuous pilot for easy start of main flame
Chromed basket with plastic coating handle
Large cold zone to prevent scorching of food particles at the bottom
Robertshaw control system to guarantee best performance
Prompt temperature recovery to make sure fries are crispy
1 x ¼” drain valve for easy drainage of oil
1 x 1/2″ NPT Rear Gas Connection
Thermostat adjusts from 93℃/200°F to 204℃/400°F
450°F/232℃ hi-limiter guarantees safety
Optional with castors
Height Adjustable Feet
Additional Information: Can be configured for either natural gas (NG) or LPG connection by default - can only be converted by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 394 x 767 x 1182 mmFRYER BASKET SIZE: 152 x 311 x 165 mmPOWER: 35.2 kWCAPACITY: 25 LitresWEIGHT: 69 KGINPUT BTU/hr: 120,000MATERIAL: Stainless SteelCONTROL UNIT: ToggleINSTRUCTION MANUALOVERALL DRAWINGEXPLODED DIAGRAM & PARTS LISTTANK DRAWING
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: GF150
Please check the manual packet for the LPG/NG conversion jets, pilot jet, dataplate, and fittings pack.
The heavy duty Hamoki GF150 Free Standing Single Tank Fryer has stainless steel construction and comes with a variety of useful and time-saving features. Some of these include an integrated splash back guard, triple tube and cool zone feature and drainage spout for quick and easy maintenance. The fryer also comes complete with two easy clean baskets.
Vertical cast iron burner - each 30,000 BTU/hr
Stainless steel vat, available in 4 models
6" stainless steel adjustable heavy duty legs
Tube design with baffles inside for better heat transfer
Continuous pilot for easy start of main flame
Chromed basket with plastic coating handle
Large cold zone to prevent scorching of food particles at the bottom
Robertshaw control system to guarantee best performance
Prompt temperature recovery to make sure fries are crispy
1 x ¼” drain valve for easy drainage of oil
1 x 1/2″ NPT Rear Gas Connection
Thermostat adjusts from 93℃/200°F to 204℃/400°F
450°F/232℃ hi-limiter guarantees safety
Optional with castors
Height Adjustable Feet
Additional Information: Can be configured for either natural gas (NG) or LPG connection by default - can only be converted by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 534 x 767 x 1182 mmFRYER BASKET SIZE: 235 x 311 x 165 mmPOWER: 44 kWCAPACITY: 37 LitresWEIGHT: 82 KGINPUT BTU/hr: 150,000MATERIAL: Stainless SteelCONTROL UNIT: ToggleINSTRUCTION MANUALOVERALL DRAWINGEXPLODED DIAGRAM & PARTS LISTTANK DRAWING
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: CS-310
Introducing our Hamoki Countertop Electric Food Warmer a culinary essential designed to elevate your dining experience. This sleek and compact appliance seamlessly blends into your kitchen or serving area, providing a convenient solution to keep your favourite dishes at the perfect serving temperature.
Stainless steel structure
Stainless steel sheathed heating elements on top for even heat distribution compared to lamps
Mirror-polished radiant plate against element to improve efficiency
Easy access from 3 sides for food
Separate on/off switches for lamp and heater
Raised base to keep heat away from tablebase
2.5” depth GN1/1 food pan at the bottom
Anti-slip rubber foot
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 330 x 560 x 500 mmDEPTH OF PAN: 60 mmLAMP: 40 WWEIGHT: 8 KGPOWER: 0.94KW / 240 V 50 Hz
INSTRUCTION MANUAL
Please contact us to get the earliest delivery time
Our cut-off time is 3pm Mon-Fri
Model Number: ECB-60SX
Please check the manual packet for the LPG/NG conversion jets and dataplate.
The Hamoki Gas Countertop Charbroilers are versatile and stylish cooking appliances designed for commercial kitchens and food establishments such as restaurants, delis, cafeterias and hotels.
These compact and efficient cooking devices features a series of gas-powered U-shaped steel burners (each 30,000BTU/hr) or infrared elements positioned beneath a grate or grill surface, controlled every 12” width. They are specifically engineered for high-temperature grilling and searing, making it ideal for cooking a variety of foods such as steaks, burgers, chicken, seafood, and vegetables.
The charbroiler surfaces are stainless steel in the front and galvanised sides and back that retain and distribute heat evenly for consistent cooking results. Equipped with large oil collectors at the bottom, zinc alloy knob with chrome coating, these appliances are designed to withstand the rigors of a commercial kitchen environment.
Countertop gas charbroilers are a popular choice for restaurants, cafes, food trucks, and other foodservice establishments seeking to enhance their menu offerings with the delicious flavor and appealing grill marks that only charbroiling can provide.
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 1504 x 640 x 390 mmWEIGHT: 112 KGPOWER: 37.5 kWCOOKING AREA: 1500 x 460 mmBTU/HR: 150,000MATERIAL: Stainless SteelCONNECTION: 1 x 3/4″ NPT Rear Gas ConnectionEXPLODED DRAWING
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: HKR-4S
Please check the manual packet for the LPG/NG conversion jets and dataplate.
Designed for professional performance and user-friendly operation, this cooker features four burners with 4 incredibly strong cast iron pan supports.Inside, the powerful oven burner delivers a rapid heat up, whilst ignition is via taper or simple push-button piezo. Removable pan supports, lockable castors and stainless steel construction make the oven range easy to position and clean.
Power Type Natural Gas or LPG
Cast iron trivets
Integrated splashback
Italian Gas valve with microswitch flame failure feature
Four powerful top burners (manual ignition) provide instant heat
Rapid heat-up oven burner with quick, push-button piezo ignition
Two strong shelves maximise oven capacity
Sturdy castors allow for easy positioning
Strong and stylish easy-clean stainless steel construction
Natural & propane Gas - conversion kit included
Unsuitable for mobile units
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 609 x 855 x 1050 mmINPUT BTU/hr: 151,000MATERIAL: 304 Stainless SteelWEIGHT: 132 KGPOWER: 34 KW
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: HKR-6S
Please check the manual packet for the LPG/NG conversion jets and dataplate.
Designed for professional performance and user-friendly operation, this cooker features six burners with 6 incredibly strong cast iron pan supports.Inside, the powerful oven burner delivers a rapid heat up, whilst ignition is via taper or simple push-button piezo. Removable pan supports, lockable castors and stainless steel construction make the oven range easy to position and clean.
Cast iron trivets
Integrated splashback
Italian Gas valve with microswitch flame failure feature
Four powerful top burners (manual ignition) provide instant heat
Rapid heat-up oven burner with quick, push-button piezo ignition
Two strong shelves maximise oven capacity
Sturdy castors allow for easy positioning
Strong and stylish easy-clean stainless steel construction
Natural & propane Gas - conversion kit included
Unsuitable for mobile units
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 914 x 855 x 1050 mmINPUT BTU/hr: 211,000MATERIAL: 304 Stainless SteelWEIGHT: 167 KGPOWER: 47 KW
Please contact us to get the earliest delivery time
Our cut-off time is 3pm Mon-Fri
Model Number: GCB-24
Please check the manual packet for the LPG/NG conversion jets and dataplate.
The Heavy duty Hamoki Gas Countertop Charbroilers are versatile and stylish cooking appliances designed for high-volume continuous use in demanding commercial kitchens and food establishments.
These heavy duty, compact, and efficient cooking devices feature gas-powered cast iron bar burners (each 20,000BTU/hr) positioned beneath a grate or grill surface to direct heat toward them, and are controlled every 12” width. They are specifically engineered for high-temperature grilling and searing, making them ideal for cooking various foods such as steaks, burgers, chicken, seafood, and vegetables.
The grill surfaces are stainless steel in the front and galvanised sides and back that retain and distribute heat evenly for consistent cooking results. Equipped with large oil collectors at the bottom, zinc alloy knob with chrome coating, standby pilot for easy start, these appliances are designed to withstand the rigors of a commercial kitchen environment.
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 605 x 745 x 400 mmWEIGHT: 85 KGCOOKING AREA: 540 x 545 mmBTU/HR: 80,000MATERIAL: Stainless SteelPOWER: 23 KW
Please contact us to get the earliest delivery time
Our cut-off time is 3pm Mon-Fri
Model Number: GCB-36
Please check the manual packet for the LPG/NG conversion jets and dataplate.
The Heavy duty Hamoki Gas Countertop Charbroilers are versatile and stylish cooking appliances designed for high-volume continuous use in demanding commercial kitchens and food establishments.
These heavy duty, compact, and efficient cooking devices feature gas-powered cast iron bar burners (each 20,000BTU/hr) positioned beneath a grate or grill surface to direct heat toward them, and are controlled every 12” width. They are specifically engineered for high-temperature grilling and searing, making them ideal for cooking various foods such as steaks, burgers, chicken, seafood, and vegetables.
The grill surfaces are stainless steel in the front and galvanised sides and back that retain and distribute heat evenly for consistent cooking results. Equipped with large oil collectors at the bottom, zinc alloy knob with chrome coating, standby pilot for easy start, these appliances are designed to withstand the rigors of a commercial kitchen environment.
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 910 x 745 x 400 mmWEIGHT: 130 KGCOOKING AREA: 810 x 545 mmBTU/HR: 120,000MATERIAL: Stainless SteelPOWER: 34.5 KW
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: GCB-48
Please check the manual packet for the LPG/NG conversion jets and dataplate.
The Heavy duty Hamoki Gas Countertop Charbroilers are versatile and stylish cooking appliances designed for high-volume continuous use in demanding commercial kitchens and food establishments.
These heavy duty, compact, and efficient cooking devices feature gas-powered cast iron bar burners (each 20,000BTU/hr) positioned beneath a grate or grill surface to direct heat toward them, and are controlled every 12” width. They are specifically engineered for high-temperature grilling and searing, making them ideal for cooking various foods such as steaks, burgers, chicken, seafood, and vegetables.
The grill surfaces are stainless steel in the front and galvanised sides and back that retain and distribute heat evenly for consistent cooking results. Equipped with large oil collectors at the bottom, zinc alloy knob with chrome coating, standby pilot for easy start, these appliances are designed to withstand the rigors of a commercial kitchen environment.
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 1220 x 745 x 400 mmWEIGHT: 167 KGCOOKING AREA: 1080 x 545 mmBTU/HR: 160,000MATERIAL: Stainless SteelPOWER: 46 KW
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: EGG-60SX
Please check the manual packet for the LPG/NG conversion jets and dataplate.
The Hamoki Gas Countertop Griddles are versatile and stylish cooking appliances, designed for commercial kitchens and food establishments such as restaurants, delis, cafeterias and hotels.
These compact and efficient cooking devices features a series of gas-powered U-shaped burners (each 30,000BTU/hr) positioned beneath a grate or grill surface, controlled every 12” width. They are specifically engineered for high-temperature grilling and searing, making them ideal for cooking various foods such as steaks, burgers, chicken, seafood, and vegetables.
The griddles feature smooth, wide, flat cooking surfaces, made of stainless steel in the front and galvanised sides and back that retain and distribute heat evenly for consistent cooking results. Equipped with large oil collectors at the bottom, zinc alloy knob with chrome coating, standby pilot for easy start, these appliances are designed to withstand the rigors of a commercial kitchen environment.
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: (WxDxH): 1504 x 640 (700mm including rear connections) x 390 mmWEIGHT: 160 KGPOWER: 37.5 kWPLATE THICKNESS: 18 mmPLATE SIZE: 1500 x 482 mmBTU/HR: 150,000MATERIAL: Stainless SteelCONNECTION: 1 x 3/4″ NPT Rear Gas ConnectionINSTRUCTION MANUAL
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: EGG-60SX-P
Please check the manual packet for the LPG/NG conversion jets and dataplate.
The Hamoki Gas Countertop Griddles with Chromed plates are versatile and stylish cooking appliances designed for commercial kitchens and food establishments such as restaurants, delis, cafeterias, and hotels.
These compact and efficient cooking devices feature a series of gas-powered U-shaped burners (each 30,000BTU/hr) positioned beneath a grate or grill surface, controlled every 12” width. They are specifically engineered for high-temperature grilling and searing, making them ideal for cooking a variety of foods such as steaks, burgers, chicken, seafood, and vegetables.
The griddles feature a smooth, wide, cooking surface made up of a stainless steel base with a layer of chromium plating on top, With galvanised stainless steel sides and back, this unit will retain and distribute heat evenly for consistent cooking results every time. Equipped with large oil collectors at the bottom, zinc alloy knob with chrome coating, standby pilot for easy start, these appliances are also designed to withstand the rigors of a commercial kitchen environment.
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 1504 x 640 (700mm including rear connections) x 390 mmWEIGHT: 160 KGPOWER: 37.5 kWCHROMED PLATE: 20 mmPLATE SIZE: 1500 x 482 mmBTU/HR: 150,000MATERIAL: Stainless SteelCONNECTION: 1 x 3/4″ NPT Rear Gas ConnectionINSTRUCTION MANUAL
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: KB-3
Please check the manual packet for the LPG/NG conversion jets and dataplate.
The Hamoki Gas Kebab Machines are culinary marvels designed to elevate your restaurant or food establishment to new heights! Crafted with precision and innovation, these machines are the epitome of efficiency and flavour infusion.Our gas doner kebab machines feature sleek stainless steel exteriors, exuding durability and hygiene. The vertical rotisserie design ensures an even and thorough cooking process, guaranteeing that each layer of meat is perfectly cooked to juicy, succulent perfection. The adjustable skewers accommodate various meat types, allowing you to offer a diverse menu to satisfy every palate.Achieve the ideal balance of crispiness and tenderness with adjustable temperature settings, while the rotating mechanism ensures uniform cooking for consistently delicious results. Efficiency is at the forefront of our design – the doner kebab machine boasts quick heat-up times and effortless cleaning, minimising downtime and maximising productivity in your kitchen.Our commercial doner kebab machines are key to unlocking a world of flavour for your customers. Elevate your dining experience and embrace the art of kebab crafting with this indispensable addition to your kitchen.
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 537 x 639 x 843 mmBURNERS: 3NG INPUT: 28,500 BTULPG INPUT: 24,000 BTUWEIGHT: 34 KGPOWER: 8.4 kW(NG) / 7 kW(LPG) / 120 V 50 Hz
CAD DRAWING
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: KB-5
Please check the manual packet for the LPG/NG conversion jets and dataplate.
The Hamoki Gas Kebab Machines are culinary marvels designed to elevate your restaurant or food establishment to new heights! Crafted with precision and innovation, these machines are the epitome of efficiency and flavour infusion.Our gas doner kebab machines feature sleek stainless steel exteriors, exuding durability and hygiene. The vertical rotisserie design ensures an even and thorough cooking process, guaranteeing that each layer of meat is perfectly cooked to juicy, succulent perfection. The adjustable skewers accommodate various meat types, allowing you to offer a diverse menu to satisfy every palate.Achieve the ideal balance of crispiness and tenderness with adjustable temperature settings, while the rotating mechanism ensures uniform cooking for consistently delicious results. Efficiency is at the forefront of our design – the doner kebab machine boasts quick heat-up times and effortless cleaning, minimising downtime and maximising productivity in your kitchen.Our commercial doner kebab machines are key to unlocking a world of flavour for your customers. Elevate your dining experience and embrace the art of kebab crafting with this indispensable addition to your kitchen.
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 537 x 639 x 1183 mmBURNERS: 5NG INPUT: 47,500 BTULPG INPUT: 40,000 BTUWEIGHT: 44 KGPOWER: 13.9 kW (NG) / 11.7 kW (LPG) / 120 V 50 Hz
CAD DRAWING
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: GR-400
The Hamoki Flat Top Griddle has a strong stainless steel construction and has been designed with a removable drip tray. Designed for convenience, this electric griddle features a non-stick coating, ensuring that your food cooks evenly and releases effortlessly. The adjustable temperature control allows you to tailor the heat to suit different recipes, from pancakes and eggs to burgers and stir-fries. The temperature indicator light lets you know when the griddle is ready for cooking.
Chrome plate, 15 mm thickness
Splash guard to prevent food spillage
Stainless steel structure
Temperature range is 50-300°C
Stainless steel oil collector with handle
Bakelite knob, cool to touch
Large opening of front grease through
Stainless steel heating element
Anti-slip rubber foot
Heating and power indicator
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 400 x 500 x 270 mmCOOKING AREA: 400 x 396 mmPLATE THICKNESS: 15 mmPLATE: FlatWEIGHT: 27.5 KGPOWER: 3 kW (3 pin plugs fitted)
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: GR-550
The Hamoki Flat Top Griddle has a strong stainless steel construction and has been designed with a removable drip tray. Designed for convenience, this electric griddle features a non-stick coating, ensuring that your food cooks evenly and releases effortlessly. The adjustable temperature control allows you to tailor the heat to suit different recipes, from pancakes and eggs to burgers and stir-fries. The temperature indicator light lets you know when the griddle is ready for cooking.
Chrome Plate, 15 mm thickness
Splash guard to prevent food spillage
Stainless steel structure
Temperature range is 50-300°C
Stainless steel oil collector with handle
Bakelite knob, cool to touch
Large opening of front grease through
Stainless steel heating element
Anti-slip rubber foot
Heating and power indicator
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 550 x 450 x 270 mmCOOKING AREA: 546 x 348 mmPLATE THICKNESS: 15 mmPLATE: FlatWEIGHT: 31 KGPOWER: 3 kW (3 pin plugs fitted)
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: GR-610
The Hamoki Flat Top Griddle has a strong stainless steel construction and has been designed with a removable drip tray. Designed for convenience, this electric griddle features a non-stick coating, ensuring that your food cooks evenly and releases effortlessly. The adjustable temperature control allows you to tailor the heat to suit different recipes, from pancakes and eggs to burgers and stir-fries. The temperature indicator light lets you know when the griddle is ready for cooking.
Chrome plate, 15 mm thickness
Splash guard to prevent food spillage
Stainless steel structure
Temperature range is 50-300°C
Stainless steel oil collector with handle
Bakelite knob, cool to touch
Large opening of front grease through
Stainless steel heating element
Anti-slip rubber foot
Heating and power indicator
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 610 x 500 x 270 mmCOOKING AREA: 606 x 400 mmPLATE THICKNESS: 15 mmPLATE: FlatWEIGHT: 44 KGPOWER: 3 + 3 kW (3 pin plugs fitted)
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: GR-760
The Hamoki Flat Top Griddle has a strong stainless steel construction and has been designed with a removable drip tray. Designed for convenience, this electric griddle features a non-stick coating, ensuring that your food cooks evenly and releases effortlessly. The adjustable temperature control allows you to tailor the heat to suit different recipes, from pancakes and eggs to burgers and stir-fries. The temperature indicator light lets you know when the griddle is ready for cooking.
Chrome plate, 15 mm thickness
Splash guard to prevent food spillage
Stainless steel structure
Temperature range is 50-300°C
Stainless steel oil collector with handle
Bakelite knob, cool to touch
Large opening of front grease through
Stainless steel heating element
Anti-slip rubber foot
Heating and power indicator
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 760 x 500 x 270 mmCOOKING AREA: 756 x 400 mmPLATE THICKNESS: 15 mmPLATE: FlatWEIGHT: 51 KGPOWER: 3 + 3 kW (3 pin plugs fitted)
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: GHP-2L
Please check the manual packet for the LPG/NG conversion jets and dataplate.
The Hamoki Gas Hotplates will elevate your cooking experience with precision, power, and efficiency. Experience lightning-fast heating with multiple, powerful gas burners, providing versatility for various cooking tasks simultaneously.
Whether you're sautéing, boiling, simmering, or frying, our hotplates ensure even heat distribution for a consistent and reliable performance every time. Designed with convenience in mind, they feature intuitive controls for easy operation. Effortlessly adjust flame intensity with precision knobs, allowing you to fine-tune the heat according to your recipe's requirements. Take a look at all the features:
Round cast iron burner, each 30,000 BTU/hr
Heavy-duty cast grates
Standby anti-clogging pilot for easy start
Lift off burner structure for easy cleaning
Stainless steel adjustable 4″ heavy duty legs
Zinc alloy knob with chrome coating
Crumb tray at the bottom
Can be used on NG or LPG
Stainless steel in the front and sides
Available in 2, 4 and 6 burners
3/4″ NPT Rear Gas Connection
Thermocouple & Safety Valves
Safety is paramount, which is why our gas hotplates are also equipped with advanced safety features, including flame failure protection and automatic shut-off, providing you with peace of mind during your culinary adventures.
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 305 x 745 x 380 mmGRATE SIZE: 12”x12”BURNERS: 2 / 60,000 BTU/HrWEIGHT: 38 KGPOWER: 14 kWINSTRUCTION MANUALEXPLODED VIEW & PARTS LIST
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: GHP-4L
Please check the manual packet for the LPG/NG conversion jets and dataplate.
The Hamoki Gas Hotplates will elevate your cooking experience with precision, power, and efficiency. Experience lightning-fast heating with multiple, powerful gas burners, providing versatility for various cooking tasks simultaneously.
Whether you're sautéing, boiling, simmering, or frying, our hotplates ensure even heat distribution for a consistent and reliable performance every time. Designed with convenience in mind, they feature intuitive controls for easy operation. Effortlessly adjust flame intensity with precision knobs, allowing you to fine-tune the heat according to your recipe's requirements. Take a look at all the features:
Round cast iron burner, each 30,000 BTU/hr
Heavy-duty cast grates
Standby anti-clogging pilot for easy start
Lift off burner structure for easy cleaning
Stainless steel adjustable 4″ heavy duty legs
Zinc alloy knob with chrome coating
Crumb tray at the bottom
Can be used on NG or LPG
Stainless steel in the front and sides
Available in 2, 4 and 6 burners
3/4″ NPT Rear Gas Connection
Thermocouple & Safety Valves
Safety is paramount, which is why our gas hotplates are also equipped with advanced safety features, including flame failure protection and automatic shut-off, providing you with peace of mind during your culinary adventures.
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 610 x 745 x 380 mmGRATE SIZE: 12”x12”BURNERS: 4 / 120,000 BTU/HrWEIGHT: 57 KGPOWER: 28 kW
INSTRUCTION MANUALEXPLODED VIEW & PARTS LIST
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: GHP-6L
Please check the manual packet for the LPG/NG conversion jets and dataplate.
The Hamoki Gas Hotplates will elevate your cooking experience with precision, power, and efficiency. Experience lightning-fast heating with multiple, powerful gas burners, providing versatility for various cooking tasks simultaneously.
Whether you're sautéing, boiling, simmering, or frying, our hotplates ensure even heat distribution for a consistent and reliable performance every time. Designed with convenience in mind, they feature intuitive controls for easy operation. Effortlessly adjust flame intensity with precision knobs, allowing you to fine-tune the heat according to your recipe's requirements. Take a look at all the features:
Round cast iron burner, each 30,000 BTU/hr
Heavy-duty cast grates
Standby anti-clogging pilot for easy start
Lift off burner structure for easy cleaning
Stainless steel adjustable 4″ heavy duty legs
Zinc alloy knob with chrome coating
Crumb tray at the bottom
Can be used on NG or LPG
Stainless steel in the front and sides
Available in 2, 4 and 6 burners
3/4″ NPT Rear Gas Connection
Thermocouple & Safety Valves
Safety is paramount, which is why our gas hotplates are also equipped with advanced safety features, including flame failure protection and automatic shut-off, providing you with peace of mind during your culinary adventures.
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 915 x 745 x 380 mmGRATE SIZE: 12”x12”BURNERS: 6 / 180,000 BTU/HrWEIGHT: 86 KGPOWER: 42 kW
INSTRUCTION MANUALEXPLODED VIEW & PARTS LIST
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: EGG-36FG
Please check the manual packet for the LPG/NG conversion jets and dataplate.
The Hamoki Gas Countertop Griddles are versatile and stylish cooking appliances, designed for commercial kitchens and food establishments such as restaurants, delis, cafeterias and hotels.
These compact and efficient cooking devices features a series of gas-powered U-shaped burners (each 30,000BTU/hr) positioned beneath a grate or grill surface, controlled every 12” width. They are specifically engineered for high-temperature grilling and searing, making them ideal for cooking various foods such as steaks, burgers, chicken, seafood, and vegetables.
The griddles feature smooth, wide, flat cooking surfaces, made of stainless steel in the front and galvanised sides and back that retain and distribute heat evenly for consistent cooking results. Equipped with large oil collectors at the bottom, zinc alloy knob with chrome coating, standby pilot for easy start, these appliances are designed to withstand the rigors of a commercial kitchen environment.
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 904 x 640 (700mm including rear connections) x 390 mmWEIGHT: 80 KGPOWER: 21 kWPLATE THICKNESS: 18 mmPLATE SIZE: 900 x 482 mmBTU/HR: 90,000MATERIAL: Stainless SteelCAD DRAWINGINSTRUCTION MANUAL
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: GR-1000PRO
The Hamoki Flat Top Griddle has a strong stainless steel construction and has been designed with a removable drip tray. Designed for convenience, this electric griddle features a non-stick coating, ensuring that your food cooks evenly and releases effortlessly. The adjustable temperature control allows you to tailor the heat to suit different recipes, from pancakes and eggs to burgers and stir-fries. The temperature indicator light lets you know when the griddle is ready for cooking.
Chrome plate, 16 mm thickness
Splash guard to prevent food spillage
Stainless steel structure
Temperature range is 50-300°C
Stainless steel oil collector with handle
Bakelite knob, cool to touch
Large opening of front grease through
Stainless steel heating element
Anti-slip rubber foot
Heating and power indicator
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 1000 x 500 x 270 mmCOOKING AREA: 996 x 400 mmPLATE THICKNESS: 15 mmPLATE: FlatWEIGHT: 78 KGPOWER: 3 kW + 3 kW (2 x 3-pin plug fitted)
Please contact us to get the earliest delivery time
Our cut-off time is 3pm Mon-Fri
MODEL: HC-7
The Hamoki Pass Through Mobile Hot Holding Cabinets with Humidity are designed to keep food at optimal serving temperature while maintaining moisture and quality. Built for busy commercial kitchens, this mobile warmer cart uses fan-assisted convection heating to deliver fast heat-up times and even temperature distribution throughout the cabinet.
A built-in water tray system introduces natural humidity, helping prevent food from drying out during holding, ideal for maintaining the texture and freshness of cooked meals. Whether you're running a restaurant, catering operation, or large-scale food service, this unit allows you to prepare food in advance and serve efficiently during peak periods.
With an intuitive digital temperature controller, right-hand hinged door, robust stainless steel construction, and multi-level GN compatibility, this pass-through cabinet provides a reliable and practical solution for hot food holding in demanding environments.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
GN PANS ARE NOT INCLUDED.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 695 x 786 x 1194 mmINTERNAL DIMENSIONS (WxDxH): 540 x 686 x 740 mmCAPACITY PER SHELF: 2 x GN1/1 or 1 x GN 2/1TEMPERATURE: 40~140°CWEIGHT: 138 KGPOWER: 2 kW / 220-240 V 50 HzCONNECTION: 13amp 3-pin plug
Please contact us to get the earliest delivery time
Our cut-off time is 3pm Mon-Fri
MODEL: HC-14
The Hamoki Pass Through Mobile Hot Holding Cabinets with Humidity are designed to keep food at optimal serving temperature while maintaining moisture and quality. Built for busy commercial kitchens, this mobile warmer cart uses fan-assisted convection heating to deliver fast heat-up times and even temperature distribution throughout the cabinet.
A built-in water tray system introduces natural humidity, helping prevent food from drying out during holding, ideal for maintaining the texture and freshness of cooked meals. Whether you're running a restaurant, catering operation, or large-scale food service, this unit allows you to prepare food in advance and serve efficiently during peak periods.
With an intuitive digital temperature controller, 2-tier right-hand hinged door, and robust stainless steel construction this pass-through cabinet provides a reliable and practical solution for hot food holding in demanding environments.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 636 x 786 x 2000 mmINTERNAL DIMENSIONS (WxDxH): 470 x 686 x 1527 mmCAPACITY PER SHELF (WxD): 450 x 650 mm tray (NOT INCLUDED)ACCESS: Both front and rear doors open (4 total)TEMPERATURE: 40~140°CWEIGHT: 193 KGPOWER: 2 kW / 220-240 V 50 HzCONNECTION: 13amp 3-pin plug
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: DF-8T
Upgrade your commercial kitchen with the Hamoki Electric Deep Fat Fryer, designed for fast, efficient frying and consistent results in high-demand environments. Available in both single tank (DF-8T) and twin tank (DF-8T-2) configurations, this compact yet powerful countertop fryer is ideal for cafés, takeaways, food trucks, and professional kitchens.
Built from durable stainless steel and engineered for ease of use, this fryer delivers rapid heat-up times, precise temperature control, and reliable day-to-day performance.
Stainless steel structure
Temperature Range: 50～190℃
Stainless steel night cover with cool-to-touch, Bakelite handle
Wire mesh net to collect fried crumbs from food and protect heater
Heavy-duty anti-slip foot
High-limit ensures safe operation
On/Off Switch
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 290 x 550 x 410 mmBASKET: 1DRAIN TAP: YesTEMPERATURE: 50～190℃WEIGHT: 10 KGOIL CAPACITY: 8 LtrTANK CAPACITY: 10 LtrPOWER: 3 kW / 220-240 v / 50 HzPOWER SUPPLY: 1 x 13 Amp 3-pin plug
INSTRUCTION MANUAL
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: DF-8T-2
Upgrade your commercial kitchen with the Hamoki Electric Deep Fat Fryer, designed for fast, efficient frying and consistent results in high-demand environments. Available in both single tank (DF-8T) and twin tank (DF-8T-2) configurations, this compact yet powerful countertop fryer is ideal for cafés, takeaways, food trucks, and professional kitchens.
Built from durable stainless steel and engineered for ease of use, this fryer delivers rapid heat-up times, precise temperature control, and reliable day-to-day performance.
Stainless steel structure
Temperature Range: 50～190℃
Stainless steel night cover with cool-to-touch, Bakelite handle
Wire mesh net to collect fried crumbs from food and protect heater
Heavy-duty anti-slip foot
High-limit ensures safe operation
On/Off Switch
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 580 x 550 x 410 mmBASKET: 2DRAIN TAP: YesTEMPERATURE: 50～190℃WEIGHT: 17.5 KGOIL CAPACITY: 8+8 LtrTANK CAPACITY: 10+10 LtrPOWER: 3+3 kW / 220-240 v / 50 HzPOWER SUPPLY: 2 x 13 Amp 3-pin plug
INSTRUCTION MANUAL
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: EF-DF
Take control of your doughnut production with the Hamoki Commercial Electric Doughnut Fryer, purpose-built for bakeries, cafés, dessert shops, and takeaway kitchens. Designed for consistent, even frying of dough-based products, this compact countertop unit delivers professional results without the footprint of larger floor-standing equipment.
To improve workflow and efficiency, the unit is supplied with dual frying baskets, allowing operators to alternate between batches seamlessly. This setup is particularly effective in small to medium-scale operations, where maintaining output without compromising quality is essential. The wide surface frying area and precise thermostat control of the EF-DF allow doughnuts to float, cook evenly, and achieve a uniform golden finish every time, which is ideal for high-quality presentation and repeatable results.
Stainless steel structure
Temperature Range: 50～190℃ and automatic heat cycling
Stainless steel night cover with cool-to-touch, Bakelite handle
Clear power and heating indicator lights to provide instant visibility of operational status
Rapid recovery between batches for continuous production
Heavy-duty anti-slip foot
High-limit overheat protection with manual reset
Micro-switch safety cut-off when heating head is lifted
Alternate batches for improved output and efficiency
Simple On/Off Switch
Integrated drain tap for safe oil removal
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 545 x 460 x 355 mmBASKET: 2DRAIN TAP: YesTEMPERATURE: 50～190℃MAX. LOAD WEIGHT: 2 KG per loadWEIGHT: 19 KGOIL CAPACITY: 12 LtrPOWER: 3 kW / 220-240 v / 50 HzPOWER SUPPLY: 1 x 13 Amp 3-pin plug
INSTRUCTION MANUAL
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: HA-F-700
The Hamoki HA-F-700 Commercial Chip Dump is a robust free-standing food holding station designed for busy restaurants, takeaways, and professional kitchens. Powered by 1350W and equipped with three 250W heating lamps, it keeps freshly cooked chips warm and ready to serve at an adjustable temperature of 50–90°C. The unit also includes two GN 1/6 pans with a 150mm depth, providing convenient storage for seasonings, sauces, or serving accessories.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 600 x 700 x 1613mmPOWER: 1350W / 220~240V 50HzWEIGHT: 68.4 KGHEATING METHOD: 3 x 250 W lamps and 1 x Heating ElementTEMPERATURE RANGE: 50~90℃GN PANS INCLUDED: 2 x GN1/6 150mm
INSTRUCTION MANUAL
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: HA-T-700
The Hamoki HA-T-700 Commercial Chip Dump is a practical countertop food holding unit designed to keep freshly cooked chips warm and ready for serving in busy restaurants, takeaways, and commercial kitchens. Equipped with three 250W heating lamps and an adjustable temperature range of 50–90°C, it helps maintain consistent serving temperatures while reducing heat loss. Its spacious 680 x 700mm countertop design provides an efficient holding area for high-volume food service.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS (WxDxH): 680 x 700 x 797mmPOWER: 750 W / 220~240V 50HzHEATING METHOD: 3 x 250 W lampsTEMPERATURE RANGE: 50~90℃WEIGHT: 32 KG
INSTRUCTION MANUAL
Please contact us to get the earliest delivery time
Our cut-off time is 3pm Mon-Fri
Model Number: HKR-4S-H
Please check the manual packet for the LPG/NG conversion jets and dataplate.
Designed for professional performance and user-friendly operation, this cooker features 4 burners, 4 incredibly strong cast iron pan supports, and a 610mm-high backsplash for added protection and easier cleaning.Inside, the powerful oven burner delivers a rapid heat up, whilst ignition is via taper or simple push-button piezo. Removable pan supports, lockable castors and stainless steel construction make the oven range easy to position and clean.
Power Type Natural Gas or LPG
Cast iron trivets
Integrated splashback
Italian Gas valve with microswitch flame failure feature
Four powerful top burners (manual ignition) provide instant heat
Rapid heat-up oven burner with quick, push-button piezo ignition
Two strong shelves maximise oven capacity
Sturdy castors allow for easy positioning
Strong and stylish easy-clean stainless steel construction
Natural & propane Gas - conversion kit included
Unsuitable for mobile units
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 609 x 855 x 1660 mmINPUT BTU/hr: 151,000MATERIAL: Stainless Steel 304WEIGHT: 132 KGPOWER: 34 KW
Please contact us to get the earliest delivery time
Our cut-off time is 3pm Mon-Fri
Model Number: HKR-6S-H
Please check the manual packet for the LPG/NG conversion jets and dataplate.
Designed for professional performance and user-friendly operation, this cooker features 6 burners, 6 incredibly strong cast iron pan supports, and a 610mm-high backsplash for added protection and easier cleaning.Inside, the powerful oven burner delivers a rapid heat up, whilst ignition is via taper or simple push-button piezo. Removable pan supports, lockable castors and stainless steel construction make the oven range easy to position and clean.
Cast iron trivets
Integrated splashback
Italian Gas valve with microswitch flame failure feature
Four powerful top burners (manual ignition) provide instant heat
Rapid heat-up oven burner with quick, push-button piezo ignition
Two strong shelves maximise oven capacity
Sturdy castors allow for easy positioning
Strong and stylish easy-clean stainless steel construction
Natural & propane Gas - conversion kit included
Unsuitable for mobile units
Additional Information: Configured for a natural gas (NG) connection by default - can only be converted to LPG gas by a qualified Gas-Safe registered COMCAT Engineer (CONVERSION KIT INCLUDED).
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 914 x 855 x 1660 mmINPUT BTU/hr: 211,000MATERIAL: Stainless Steel 304NET WEIGHT: 167 KGGROSS WEIGHT: 195 KGPOWER: 47 KW
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: J210
The Hamoki Bone Saw is made from cast anodised aluminium, resulting in a shiny and stylish design, whilst also ensuring that the machine stays hygienic and rustproof. It is simple and safe to use, whilst its sturdy and robust frame means it is capable of standing alone. It features a counter, meat pusher and stainless steel server and overall makes light work of cleaning due to all electrical parts being fully protected whilst the blade, upper pulley and its support are easily detachable.
Easy to clean and maintain - smooth inner frame design
Heavy-duty motor designed for continuous operation
Emergency stop protection when the door opens
Meat pusher to protect the hand
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 500 x 500 x 920 mmBLADE THICKNESS: 0.5 mmSAW LENGTH: 1650 mm (Code: 900001)SAW WIDTH: 16 mmCUT THICKNESS: 5-155 mmSURFACE DIMENSIONS: 505 x 415 mmWEIGHT: 47 KGPOWER: 750 W
INSTRUCTION MANUAL
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: J320
The Hamoki Bone Saw is made from cast anodised aluminium, resulting in a shiny and stylish design, whilst also ensuring that the machine stays hygienic and rustproof. It is simple and safe to use, whilst its sturdy and robust frame means it is capable of standing alone. It features a counter, meat pusher and stainless steel server and overall makes light work of cleaning due to all electrical parts being fully protected whilst the blade, upper pulley and its support are easily detachable.
Easy to clean and maintain - smooth inner frame design
Heavy-duty motor designed for continuous operation
Emergency stop protection when the door opens
Meat pusher to protect the hand
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 620 x 590 x 1130 mmBLADE THICKNESS: 0.5 mmSAW LENGTH: 2040 mm (Code: 900002)SAW WIDTH: 19 mmCUT THICKNESS: 5-200 mmSURFACE DIMENSIONS: 590 x 480 mmWEIGHT: 63.5 KGPOWER: 1.1 kW
INSTRUCTION MANUAL
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: FER-250
The Ferrowick Commercial Bone Saw FER-250 is a reliable countertop meat and bone cutting machine designed for butcher shops, restaurants, and professional food preparation. Featuring a 250mm maximum cutting height and a durable 1650mm saw blade, it delivers clean, precise cuts through meat and bone with ease. Powered by a dependable 750W motor and fitted with a 220–240V 3-pin plug, this compact yet robust bone saw combines powerful performance with space-saving convenience, making it an excellent choice for busy commercial kitchens.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
Body Material: S/S 304
Power: 750W / 220~240V 50Hz
Power Connection Method: 3-pin Plug
Cut Height: 250mm
Blade Length: 1650mm
Installation Type: Countertop
Product Dimensions (WxDxH): 529 x 478 x 902mm
Package Dimensions (WxDxH): 595 x 545 x 1060mm
Net Weight: 43kg
Gross Weight: 66kg
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: FER-300
The Ferrowick Commercial Bone Saw FER-300 is a reliable countertop meat and bone cutting machine designed for butcher shops, restaurants, and professional food preparation. Featuring a 300mm maximum cutting height and a durable 2020mm saw blade, it delivers clean, precise cuts through meat and bone with ease. Powered by a dependable 1500W motor and fitted with a 220–240V 3-pin plug, this compact yet robust bone saw combines powerful performance with space-saving convenience, making it an excellent choice for busy commercial kitchens.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.v
Body Material: S/S 304
Power: 1500W / 220~240V 50Hz
Power Connection Method: 3-pin Plug
Cut Height: 300mm
Blade Length: 2020mm
Installation Type: Countertop
Product Dimensions (WxDxH): 639 x 587 x 1092mm
Package Dimensions (WxDxH): 690 x 640 x 1300mm
Net Weight: 65kg
Gross Weight: 95kg
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: FER-300F
The Ferrowick Commercial Bone Saw FER-300F is a powerful free-standing meat and bone cutting machine designed for butcher shops, restaurants, food processing businesses, and other professional catering environments. Featuring a 300mm maximum cutting height and a durable 2020mm saw blade, it delivers clean, accurate cuts through larger pieces of meat and bone with ease. Powered by a robust 1500W motor and fitted with a 220–240V 3-pin plug, this heavy-duty bone saw combines strong cutting performance with a stable free-standing design, making it a reliable choice for demanding commercial use.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
Body Material: S/S 304
Power: 1500W / 220~240V 50Hz
Power Connection Method: 3-pin Plug
Cut Height: 300mm
Blade Length: 2020mm
Installation Type: Free-standing
Product Dimensions (WxDxH): 639 x 626 x 1602mm
Package Dimensions (WxDxH): 690 x 640 x 1300mm
Net Weight: 75kg
Gross Weight: 110kg
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: FER-12
The Ferrowick meat mincer FER-12 is ideal for restaurants, butcher shops and catering businesses. Powered by a 550W motor, it offers an output of up to 150kg per hour and includes 6mm and 8mm grinding plates. The single cross-knife cutting system delivers reliable performance, while the reverse function helps clear blockages quickly. Supplied with a standard 3-pin plug for easy installation.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
Body Material: 304 Stainless Steel
Power: 550W / 220~240V 50Hz
Power Connection Method: 3-pin Plug
Capacity: 150kg/h
Included Plates: 6 & 8mm
Cutting System: Single cross-knife configuration
Product Dimensions (WxDxH): 429 x 382 x 405mm
Package Dimensions (WxDxH): 485 x 425 x 445mm
Net Weight: 25kg
Gross Weight: 27kg
Reverse function: Yes
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: FER-22
The Ferrowick Meat Mincer FER-22 is a powerful and reliable commercial meat grinder, designed for butchers, restaurants, cafés, and professional kitchens. With an impressive 250kg/h grinding capacity, it efficiently processes fresh meat while delivering consistent results. Featuring a single cross-knife cutting system, 6mm and 8mm grinding plates, and a convenient reverse function to help clear jams, it offers smooth, dependable operation. The machine is powered by a 750W motor and comes fitted with a standard 220–240V 3-pin plug for easy installation.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
Body Material: 304 Stainless Steel
Power: 750W / 220~240V 50Hz
Power Connection Method: 3-pin Plug
Capacity: 250kg/h
Included Plates: 6 & 8mm
Cutting System: Single cross-knife configuration
Product Dimensions (WxDxH): 479 x 420 x 416mm
Package Dimensions (WxDxH): 545 x 445 x 455mm
Net Weight: 31kg
Gross Weight: 33kg
Reverse function: Yes
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: FER-32
The Ferrowick Meat Mincer FER-32 is a heavy-duty commercial meat grinder built for demanding butchers, restaurants, supermarkets, and catering businesses. Delivering an impressive 350kg/h grinding capacity, it handles high-volume meat processing with ease. Equipped with a single cross-knife cutting system, 6mm and 8mm grinding plates, and a practical reverse function to quickly clear blockages, it ensures reliable and efficient performance. Powered by a robust 1500W motor and supplied with a 220–240V 3-pin plug, this meat mincer is ideal for professional kitchens requiring consistent, high-quality results.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
Body Material: 304 Stainless Steel
Power: 1500W / 220~240V 50Hz
Power Connection Method: 3-pin Plug
Capacity: 350kg/h
Included Plates: 6 & 8mm
Cutting System: Single cross-knife configuration
Product Dimensions (WxDxH): 570 x 585 x 460mm
Package Dimensions (WxDxH): 630 x 630 x 615mm
Net Weight: 54kg
Gross Weight: 72kg
Reverse function: Yes
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: FER-32W
The Ferrowick Meat Mincer FER-32W is a premium heavy-duty commercial meat grinder designed for butchers, food processors, and high-volume professional kitchens. With an outstanding 500kg/h grinding capacity, it delivers fast, consistent performance for demanding meat preparation tasks. Featuring single or double cross-knife cutting configurations, 3mm, 5mm, 9mm and 16mm grinding plates, plus a pre-cutting plate, it offers exceptional versatility for different mince textures. A convenient reverse function helps clear blockages quickly, while the powerful 1500W motor and 220–240V 3-pin plug ensure reliable, everyday operation.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
Body Material: 304 Stainless Steel
Power: 1500W / 220~240V 50Hz
Power Connection Method: 3-pin Plug
Capacity: 500kg/h
Included Plates: 3, 5, 9, 16mm & pre-cutting plate
Cutting System: Single or Double cross-knife configuration
Product Dimensions (WxDxH): 566 x 520 x 636mm
Package Dimensions (WxDxH): 635 x 585 x 805mm
Net Weight: 65kg
Gross Weight: 83kg
Reverse function: Yes
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: FER-32F
The Ferrowick Floor-Standing Meat Mincer FER-32F is a heavy-duty commercial meat grinder engineered for butcher shops, meat processing facilities, and high-output catering kitchens. With a powerful 500kg/h grinding capacity, it is built to handle continuous, high-volume production. Equipped with single or double cross-knife cutting configurations, 3mm, 5mm, 9mm and 16mm grinding plates, and a pre-cutting plate, it delivers excellent flexibility for a wide range of meat processing applications. The integrated reverse function helps clear blockages with ease, while the 1500W motor and 220–240V 3-pin plug provide dependable, professional-grade performance.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
Body Material: 304 Stainless Steel
Power: 1500W / 220~240V 50Hz
Power Connection Method: 3-pin Plug
Capacity: 500kg/h
Included Plates: 3, 5, 9, 16mm & pre-cutting plate
Cutting System: Single or Double cross-knife configuration
Product Dimensions (WxDxH): 566 x 520 x 927mm
Package Dimensions (WxDxH): 635 x 585 x 805mm
Net Weight: 70kg
Gross Weight: 90kg
Reverse function: Yes
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: IMT-066The Hamoki Stainless Steel Table is a free-standing stainless steel preparation table made of 201 stainless steel. Includes an under shelf for practical storage. Practical, reliable and great value, extremely easy to clean, the unit is perfect for use in any kitchen and food preparation areas.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 600 x 600 x 900 mmTYPE: Central
ASSEMBLY INSTRUCTIONS
Please contact us to get the earliest delivery time
Our cut-off time is 3pm Mon-Fri
Model Number: IMT-096
The Hamoki Stainless Steel Table is a free-standing stainless steel preparation table made of 201 stainless steel. Includes an under shelf for practical storage. Practical, reliable and great value, extremely easy to clean, the unit is perfect for use in any kitchen and food preparation areas.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 900 x 600 x 900 mmTYPE: Central
ASSEMBLY INSTRUCTIONS
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: IMT-126
The Hamoki Stainless Steel Table is a free-standing stainless steel preparation table made of 201 stainless steel. Includes an under shelf for practical storage. Practical, reliable and great value, extremely easy to clean, the unit is perfect for use in any kitchen and food preparation areas.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 1200 x 600 x 900 mmTYPE: Central
ASSEMBLY INSTRUCTIONS
Please contact us to get the earliest delivery time
Our cut-off time is 3pm Mon-Fri
Model Number: IMT-156
The Hamoki Stainless Steel Table is a free-standing stainless steel preparation table made of 201 stainless steel. Includes an under shelf for practical storage. Practical, reliable and great value, extremely easy to clean, the unit is perfect for use in any kitchen and food preparation areas.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 1500 x 600 x 900 mmTYPE: Central
ASSEMBLY INSTRUCTIONS
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: IMT-186
The Hamoki Stainless Steel Table is a free-standing stainless steel preparation table made of 201 stainless steel. Includes an under shelf for practical storage. Practical, reliable and great value, extremely easy to clean, the unit is perfect for use in any kitchen and food preparation areas.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 1800 x 600 x 850 mmTYPE: Central
ASSEMBLY INSTRUCTIONS
Next working day delivery
Our cut-off time is 3pm Mon-Fri
Model Number: IMT-066B
The Hamoki Stainless Steel Table is a free-standing preparation table made of 201 stainless steel. With an under shelf for practical storage and an up stand to stop equipment from falling onto the floor, this item is practical, reliable and great value. Extremely easy to clean, this unit is perfect for use in any kitchen and food preparation areas.
This product is covered with a Manufacturer’s 1 Years Parts Warranty.
Please note, that with ongoing enhancements and improvements, this product may vary slightly from the content displayed.
DIMENSIONS: 600 x 600 x 900 + 100 mmTYPE: Backsplash
ASSEMBLY INSTRUCTIONS
